CAD/CAM Suction Systems
Z1 CAM
Z1 CAM with filter bag for milling machines in dental production
Features and properties
- Width: 200mm
- Height: 675mm
- Depth: 590mm
- Weight: 28KG
- Suction: 700W
- Throughput: 15-65l/s
- Noise level: 41-60dB(A)
The standard equipment of the Z1 suction systems includes a diffusor at the output of the system, which guarantees the legally prescribed exhaust air flow of a maximum of one meter per second. Alternatively, an H14 filter or an activated carbon filter can be installed there in compliance with the prescribed guide value. As a further alternative, an adapter for the exhaust air connection to the outside is optionally available.
The Z1 has 5 suction levels, the performance of which the user can freely set and store in the first four levels. The unit has also an intelligent control of the suction power, which adjusts itself to the programmed setting depending on the filling level of the filter. This ensures a constant performance independent of the filling level of the filter bag. The fifth suction level serves as a boost for short-term maximum suction power.
In the extraction systems of the Z1 ECO and Z1 CAM model series the new Smart Drive control for carbon brush motors is used. This technology enables motor runtimes of 1500 hours and more, particularly in intermittent operation with handpiece workstations and devices. The running time can be significantly increased by changing the carbon brushes. This means that a cost-efficient extraction solution is available, which nevertheless enables a very long service life under moderate operating conditions.
The suffix refers to suction systems in dental laboratories. It confirms that the dust extractor meets the requirements of the test specification DIN EN 60335-2-69, Appendix AA (degree of dust separation, filter change, dust extraction from the unit etc.) or that the dental suction system complies with the requirements described in the test specification GS-IFA-M020.
A Bluetooth connection with Zubler Extraction Technology APP gives you the possibility to obtain rapidly a high number of information about the condition of the suction system. You can easily make individual settings on the device from your smartphone or tablet and contact us via remote maintenance in case of service.
For a higher comfort in handling the device we have developed an external control module, which you can additionally install at a freely selectable position of your work station. Always at your eye level, you control and operate the unit and obtain directly important information about the suction system.
- SINGLE SUCTION
- EXHAUST OUTDOORS
- AIR RECIRCULATION IN THE LABORATORY
- FILTER BAG
- FILTER CARTRIDGE
- CARBON BRUSH MOTOR
- BRUSHLESS MOTOR
- CAD/CAM COMPATIBLE
Z1 CAM EC
Z1 CAM EC with filter bag and brushless motor for milling machines in dental production
Features and properties
- Width: 200mm
- Height: 675mm
- Depth: 590mm
- Weight: 28KG
- Suction: 700W
- Throughput: 15-65l/s
- Noise level: 41-60dB(A)
The standard equipment of the Z1 suction systems includes a diffusor at the output of the system, which guarantees the legally prescribed exhaust air flow of a maximum of one meter per second. Alternatively, an H14 filter or an activated carbon filter can be installed there in compliance with the prescribed guide value. As a further alternative, an adapter for the exhaust air connection to the outside is optionally available.
The Z1 has 5 suction levels, the performance of which the user can freely set and store in the first four levels. The unit has also an intelligent control of the suction power, which adjusts itself to the programmed setting depending on the filling level of the filter. This ensures a constant performance independent of the filling level of the filter bag. The fifth suction level serves as a boost for short-term maximum suction power.
Extraction systems Z1 CAM-EC are equipped with a brushless, electronically controlled motor that can work for 5000 hours and more without maintenance. This variant is particularly suitable when very long, continuous running times are required. If suction is to be used around the clock in continuous operation, there is no alternative. The noise development is just as low as with the models with brush motors, since the high-frequency vibrations are absorbed by efficient insulation.
The suffix refers to suction systems in dental laboratories. It confirms that the dust extractor meets the requirements of the test specification DIN EN 60335-2-69, Appendix AA (degree of dust separation, filter change, dust extraction from the unit etc.) or that the dental suction system complies with the requirements described in the test specification GS-IFA-M020.
A Bluetooth connection with Zubler Extraction Technology APP gives you the possibility to obtain rapidly a high number of information about the condition of the suction system. You can easily make individual settings on the device from your smartphone or tablet and contact us via remote maintenance in case of service.
For a higher comfort in handling the device we have developed an external control module, which you can additionally install at a freely selectable position of your work station. Always at your eye level, you control and operate the unit and obtain directly important information about the suction system.
- SINGLE SUCTION
- EXHAUST OUTDOORS
- AIR RECIRCULATION IN THE LABORATORY
- FILTER BAG
- FILTER CARTRIDGE
- CARBON BRUSH MOTOR
- BRUSHLESS MOTOR
- CAD/CAM COMPATIBLE
Z1 CAM PRO
Z1 CAM PRO with permanent filter system for milling machines in dental production
Features and properties
- Width: 200mm
- Height: 675mm
- Depth: 590mm
- Weight: 31KG
- Suction: 700W
- Throughput: 15-65l/s
- Noise level: 41-60dB(A)
The standard equipment of the Z1 suction systems includes a diffusor at the output of the system, which guarantees the legally prescribed exhaust air flow of a maximum of one meter per second. Alternatively, an H14 filter or an activated carbon filter can be installed there in compliance with the prescribed guide value. As a further alternative, an adapter for the exhaust air connection to the outside is optionally available.
The Z1 has 5 suction levels, the performance of which the user can freely set and store in the first four levels. The unit has also an intelligent control of the suction power, which adjusts itself to the programmed setting depending on the filling level of the filter. This ensures a constant performance independent of the filling level of the filter bag. The fifth suction level serves as a boost for short-term maximum suction power.
In the extraction systems of the Z1 ECO and Z1 CAM model series the new Smart Drive control for carbon brush motors is used. This technology enables motor runtimes of 1500 hours and more, particularly in intermittent operation with handpiece workstations and devices. The running time can be significantly increased by changing the carbon brushes. This means that a cost-efficient extraction solution is available, which nevertheless enables a very long service life under moderate operating conditions.
The suffix refers to suction systems in dental laboratories. It confirms that the dust extractor meets the requirements of the test specification DIN EN 60335-2-69, Appendix AA (degree of dust separation, filter change, dust extraction from the unit etc.) or that the dental suction system complies with the requirements described in the test specification GS-IFA-M020.
A Bluetooth connection with Zubler Extraction Technology APP gives you the possibility to obtain rapidly a high number of information about the condition of the suction system. You can easily make individual settings on the device from your smartphone or tablet and contact us via remote maintenance in case of service.
For a higher comfort in handling the device we have developed an external control module, which you can additionally install at a freely selectable position of your work station. Always at your eye level, you control and operate the unit and obtain directly important information about the suction system.
- SINGLE SUCTION
- EXHAUST OUTDOORS
- AIR RECIRCULATION IN THE LABORATORY
- FILTER BAG
- FILTER CARTRIDGE
- CARBON BRUSH MOTOR
- BRUSHLESS MOTOR
- CAD/CAM COMPATIBLE
Z1 CAM PRO EC
Z1 CAM PRO EC with permanent filter system and brushless motor for milling machines in dental production
Features and properties
- Width: 200mm
- Height: 675mm
- Depth: 590mm
- Weight: 28KG
- Suction: 700W
- Throughput: 15-65l/s
- Noise level: 41-60dB(A)
The standard equipment of the Z1 suction systems includes a diffusor at the output of the system, which guarantees the legally prescribed exhaust air flow of a maximum of one meter per second. Alternatively, an H14 filter or an activated carbon filter can be installed there in compliance with the prescribed guide value. As a further alternative, an adapter for the exhaust air connection to the outside is optionally available.
The Z1 has 5 suction levels, the performance of which the user can freely set and store in the first four levels. The unit has also an intelligent control of the suction power, which adjusts itself to the programmed setting depending on the filling level of the filter. This ensures a constant performance independent of the filling level of the filter bag. The fifth suction level serves as a boost for short-term maximum suction power.
Extraction systems Z1 CAM PRO-EC are equipped with a brushless, electronically controlled motor that can work for 5000 hours and more without maintenance. This variant is particularly suitable when very long, continuous running times are required. If suction is to be used around the clock in continuous operation, there is no alternative. The noise development is just as low as with the models with brush motors, since the high-frequency vibrations are absorbed by efficient insulation.
The suffix refers to suction systems in dental laboratories. It confirms that the dust extractor meets the requirements of the test specification DIN EN 60335-2-69, Appendix AA (degree of dust separation, filter change, dust extraction from the unit etc.) or that the dental suction system complies with the requirements described in the test specification GS-IFA-M020.
A Bluetooth connection with Zubler Extraction Technology APP gives you the possibility to obtain rapidly a high number of information about the condition of the suction system. You can easily make individual settings on the device from your smartphone or tablet and contact us via remote maintenance in case of service.
For a higher comfort in handling the device we have developed an external control module, which you can additionally install at a freely selectable position of your work station. Always at your eye level, you control and operate the unit and obtain directly important information about the suction system.
- SINGLE SUCTION
- EXHAUST OUTDOORS
- AIR RECIRCULATION IN THE LABORATORY
- FILTER BAG
- FILTER CARTRIDGE
- CARBON BRUSH MOTOR
- BRUSHLESS MOTOR
- CAD/CAM COMPATIBLE
FZ20
Central suction system for the connection of all workstations and dust-generating appliances in laboratories of any size. Thanks to an infinitely adjustable vacuum control independent of filter contamination and conduction of the exhaust air to the outdoor area, the system offers a high standard of air purity in the laboratory. The system is tailored perfectly to your laboratory through individual planning and consulting.
- CENTRAL SUCTION
- EXHAUST OUTDOORS
- AIR RECIRCULATION IN THE LABORATORY
- FILTER BAG
- FILTER CARTRIDGE
- CARBON BRUSH MOTOR
- BRUSHLESS MOTOR
- CAD/CAM COMPATIBLE